Skip to main content

Phones answered 24/7 · Long Island, NY

Dryers · 5 min to read

What That Dryer Noise Means: Thumping, Squealing, Grinding and Rattling

Dryers have only a few moving parts, and each one wears out with its own sound. Describing the noise accurately is often half the diagnosis.

Written by PrimeFix Long Island

A dryer is a simple machine: a motor turns a belt, the belt turns a drum, and a blower pushes hot air through it. Because there are only a handful of moving parts, the sound a dryer makes when one of them wears out is often a good clue to which one it is. Before you book a repair, it is worth listening carefully — and checking for the simplest cause of all, which is something left in a pocket.

Before anything else: safety

Unplug an electric dryer before looking inside or behind it. For a gas dryer, unplug it as well; do not disconnect the gas line yourself. If you smell gas at any point, stop, leave the house, and call your gas utility from outside.

Rattling, clanking or ticking

Something in the drum

Coins, keys, buttons, lip balm, pens and small tools rattle around the drum and are the most common cause of a sudden new noise. Check the drum, including the gaps around the edges and the lifter fins (the ridges inside the drum). Some lifters are hollow and can trap small objects.

Something in the lint screen housing or blower

Small items, socks and bra underwires can fall past the lint screen and end up in the housing below it or in the blower wheel. A ticking or rattling sound that stays steady through the cycle can be this. Look into the lint screen opening with a flashlight. Getting into the blower housing usually means removing panels — a reasonable job to leave to a technician.

Loose panels or the dryer itself

A dryer that is not level, or one whose back panel or vent connection is loose, can rattle and buzz. Check the leveling legs and make sure the dryer is not touching a wall or the washer.

Thumping

Shoes, sneakers or heavy items

The obvious one first: running sneakers, a heavy rug or a single bunched comforter will thump. If it only happens with certain loads, that is the cause.

Drum rollers or drum support

Many dryers rest the back of the drum on two or more small wheels called drum rollers. Over time they can develop flat spots or their bearings wear, and the drum thumps rhythmically as it turns. Rollers are a common wear item, and they are often replaced in pairs. A thumping that started gradually, and is present with every load, points here.

Lumpy belt

The drive belt can develop a lump or a frayed section, producing a thump once per drum revolution.

Squealing or squeaking

Idler pulley

The idler pulley keeps tension on the belt. When its bearing wears, it squeals, often loudest at the start of the cycle. This is one of the most common dryer noises and a fairly routine repair.

Drum glides or front bearing

Many dryers support the front of the drum on plastic or felt glides, or a front bearing. When they wear thin, the drum can rub metal on metal, producing a squeak or a scraping sound. You may also see black dust or marks on clothes near the front of the drum.

Motor bearings

A squeal or high-pitched whine that stays even when the drum is not turning — some technicians test by removing the belt — can come from the motor's bearings.

Grinding or scraping

  • Rear drum bearing or support on some designs wears and produces a grinding noise.
  • A worn front seal or felt lets the drum rub against the front panel.
  • A foreign object caught between the drum and the cabinet scrapes with every turn.

Grinding that is getting louder deserves prompt attention, because worn bearings and supports can damage the drum or other parts.

Roaring or loud humming

  • The blower wheel can become clogged with lint or damaged, causing a roaring or loud whooshing. A cracked blower wheel may also rattle.
  • A restricted vent can make the airflow louder. It also makes the dryer take longer to dry and run hotter. Our post on a dryer that takes two cycles covers vent checks.
  • A motor humming but not starting can be a failing motor or a broken belt; on many dryers a broken belt also stops the motor via a safety switch.

Gas dryer sounds that are normal

Gas dryers often make a soft click and a low whoosh when the burner lights, and you may hear clicks as the gas valve cycles during the run. These are normal. A loud bang or boom when the burner lights is not normal and should be checked by a technician.

Noises that call for stopping the dryer

Stop using the dryer and get it checked if:

  • the noise is a grinding or metal-on-metal scrape that is getting worse;
  • you smell burning rubber, hot metal or scorched lint;
  • the drum stops turning while the motor keeps running;
  • you hear a loud bang when a gas dryer lights.

Helping the technician

When you book, describe the sound as closely as you can — a thump, a squeal, a grind — and note when it happens: at start-up, throughout the cycle, only with certain loads, or only when the drum is hot. A short phone video with sound can help. The model number, usually on a sticker inside the door frame, is also useful.

You can book a dryer repair visit or read about our dryer repair service across Nassau and Suffolk.

Continue with

Call now(631) 729-9995Book online