Skip to main content

Phones answered 24/7 · Long Island, NY

Dishwashers · 7 min to read

White Film or Orange Stains in Your Dishwasher? What Long Island Water Is Telling You

Long Island's tap water comes out of the ground, and what it carries — or does not carry — shows up on your dishes as two very different marks that need two very different fixes.

Written by PrimeFix Long Island

Almost every glass of water poured on Long Island started out underground. There is no reservoir in the hills feeding Nassau and Suffolk: the drinking water is pumped from the aquifers beneath the island, and that single fact explains most of what you see on your dishes.

There are two complaints we hear about dishwashers more than any other that turn out not to be mechanical at all. One is a cloudy white haze on glasses. The other is an orange, brown or gray stain on the tub, the racks or the dishes themselves. They look like the same problem — "the dishwasher is leaving something behind" — but they come from different places, and treating one as the other wastes money.

Where your water comes from

Long Island sits on a stack of three principal aquifers. The shallowest is the Upper Glacial; below it is the Magothy, which supplies most of the public water on the island; and deepest is the Lloyd. The federal government designates the system a sole-source aquifer, which means the island depends on it for its drinking water and has no practical alternative. Around fifty separate water suppliers pump from it across the two counties — water districts, villages, the Suffolk County Water Authority and private water companies — and each one treats and reports its own water.

That is why there is no single answer to "is Long Island water hard?" It depends on which supplier you are on and which wells feed your street. Some suppliers describe their water as soft; others report noticeably more minerals. The honest way to find out is to read your own supplier's Annual Water Quality Report, which every public supplier publishes each year and which lists hardness alongside iron and manganese. If you are on a private well, which is common in parts of Suffolk, nobody has measured it for you, and a lab test is the only real answer.

The white haze: three possible causes

A cloudy film on glassware has three common causes, and only one of them is minerals.

  • Mineral film. Calcium and magnesium in harder water dry onto glass as spots and haze. This is the classic "hard water" look.
  • Detergent residue. Too much detergent for the water you have, especially in softer water, leaves its own film. People often add more detergent when they see haze, which makes this version worse.
  • Etching. This is permanent damage to the glass surface. Strong detergent in very soft water, hot washes, and time all contribute. It looks like a film but it cannot be washed off, because it is not on the glass — it is in it.

The vinegar test

Before you change anything, find out which one you have. Soak one cloudy glass in undiluted white vinegar for about five minutes, then rinse it.

  • If the haze is gone, it was a deposit — minerals or residue — and it can be managed.
  • If the haze is still there, the glass is etched. Nothing will bring it back, and the goal becomes protecting the rest of your glassware.

Treating a deposit film

If the vinegar removed it, work through these in order:

  1. Check the rinse aid dispenser. It is usually a small cap next to the detergent cup. Empty dispensers are the single most common reason for spotting. Many machines let you adjust the dose.
  2. Match detergent to your water. Follow the detergent maker's dosing guidance for your hardness rather than filling the cup to the brim out of habit. In softer water, less is usually better.
  3. Find the water hardness setting. Many European-built dishwashers, and plenty of others, have a hardness setting in the menu that controls rinse aid or a built-in softener. Installers often leave it at the factory default. Your supplier's report gives you the number to set it to.
  4. Clean the filter. A clogged filter recirculates dirty water and leaves grit and grease on everything. Most modern machines have a removable filter under the lower spray arm that should be rinsed regularly.

Treating etching

If the glass stayed cloudy, stop doing the things that etch: reduce detergent, avoid the hottest and longest cycles for glassware when you do not need them, and hand-wash anything you really care about. Some manufacturers specifically recommend lower wash temperatures for glass. The damage already done is permanent.

Orange, brown or black stains: this is iron and manganese

Stains with color are a different story. The Upper Glacial and Magothy aquifers naturally contain iron and manganese, and in some locations the levels are high enough that suppliers run treatment plants to remove them. Several water districts and companies on the island operate iron-removal plants for exactly this reason.

Iron typically leaves reddish-brown or orange staining on porcelain, dishes and laundry. Manganese tends to leave brownish-black or gray marks. They often turn up together.

Some patterns worth knowing:

  • Stains appear suddenly after work on the water main or after a hydrant flush. Sediment that normally sits in the pipes gets stirred up. Your supplier usually announces flushing schedules; running cold water until it runs clear before starting the dishwasher avoids pulling sediment into the machine.
  • Stains are constant and you are on a private well. This is common with untreated well water. A water test will tell you whether you need an iron filter, and that is a plumbing question rather than an appliance one.
  • Only the plastic parts are orange. Tomato sauce and some spices stain plastic tubs and racks orange too. If the stain is confined to plastic and lines up with what you cook, it may not be iron at all.

Do not reach for bleach

This is the mistake that makes it worse. Chlorine bleach and strongly alkaline cleaners can intensify iron and manganese stains rather than lift them. Products made specifically for iron removal are the right tool, used according to their instructions and only if the dishwasher's manual allows them in the machine.

When it is actually the dishwasher

Water quality explains a lot, but not everything. Call us if you notice:

  • Haze that appears along with dishes coming out dirty or gritty — that points at a weak wash pump, a blocked spray arm or a drain problem.
  • Water left in the bottom of the tub after a cycle.
  • Rinse aid that disappears far faster than it should, or never seems to be used.
  • Rust spots on the racks themselves where the coating has chipped. That is the rack corroding, not water staining, and loose rust will mark dishes until the rack is repaired or replaced.

If you are not sure which of these you are looking at, describe it when you book a visit and we will tell you whether it sounds like a water question or a dishwasher repair. Sometimes the most useful thing we can say is that the machine is fine and the fix is a bottle of rinse aid.

Continue with

Call now(631) 729-9995Book online